Ford and Dodge 6 lug wheels are not always the same. Some models like the Ford Ranger and Ram 1500 share a 6×139.7mm pattern, but most Fords use 6×135mm, making compatibility limited.
In this guide, we’ll break down what “6 lug” actually means, explore the differences between Ford and Dodge bolt patterns, and help you understand whether a wheel swap is possible between the two.
What Does “6 Lug” Mean?
The term “6 lug” simply describes the number of bolts (or studs) used to hold the wheel onto the hub. A six-lug wheel has six holes arranged evenly around the center bore.
But the lug count is only part of the story. To ensure a proper fit, you also need to match:
- Bolt Pattern Diameter (Pitch Circle Diameter – PCD)
- Stud Size and Thread Pitch
- Center Bore (the size of the hole in the middle of the wheel)
- Offset and Backspacing
This means that while both Ford and Dodge may have wheels with six lugs, the spacing, size, and design may differ, preventing a direct swap.
Ford 6 Lug Bolt Patterns by Year
Ford has been using 6 lug bolt patterns for many years, particularly on the F-150 and similar models. However, the most common Ford 6 lug pattern in modern trucks is 6 × 135 mm.
Also Read: Will 8 Lug Chevy Wheels Fit A Dodge – Proven Fitment Guide!
Common Ford 6 Lug Applications:
- F-150 (2004–present) → 6 × 135 mm
- Ford Expedition (2003–present) → 6 × 135 mm
- Ford Ranger (older models) → Some versions used 6 × 5.5 in (139.7 mm)
Ford 6 Lug Bolt Pattern Table
| Model | Years | Bolt Pattern | Notes |
| Ford F-150 | 2004–present | 6 × 135 mm | Most common Ford 6 lug |
| Ford Expedition | 2003–present | 6 × 135 mm | Same as F-150 |
| Ford Ranger (old) | Pre-2000 | 6 × 5.5 in | Different from modern F-150 |
As shown above, Ford has largely standardized the 6 × 135 mm pattern in recent decades.
Dodge 6 Lug Bolt Patterns by Year
Dodge trucks and SUVs have used different patterns depending on the model and year. While many Dodge Rams use 5 lug or 8 lug, some mid-size trucks and SUVs like the Durango and Dakota have been equipped with 6 × 5.5 in (139.7 mm) bolt patterns.
Common Dodge 6 Lug Applications:
- Dodge Dakota (2005–2011) → 6 × 5.5 in
- Dodge Durango (2004–2009) → 6 × 5.5 in
- Older Dodge trucks → Some used variations of 6 × 5.5 in
Dodge 6 Lug Bolt Pattern Table
| Model | Years | Bolt Pattern | Notes |
| Dodge Dakota | 2005–2011 | 6 × 5.5 in | Matches some Chevy/Toyota patterns |
| Dodge Durango | 2004–2009 | 6 × 5.5 in | Same as Dakota |
| Dodge Ram 1500 | Most years | 5 lug / 8 lug | Rarely 6 lug |
This means Dodge’s “6 lug” is usually 6 × 5.5 in (139.7 mm), which is not the same as Ford’s 6 × 135 mm.
Direct Comparison: Ford vs Dodge 6 Lug
Here’s where things get clear.
| Feature | Ford 6 Lug | Dodge 6 Lug | Same? |
| Typical Pattern | 6 × 135 mm | 6 × 5.5 in (139.7 mm) | ❌ No |
| Hub Bore Size | 87.1 mm (F-150) | Varies (usually ~77.8 mm) | ❌ Different |
| Stud Size | M14 × 2.0 | Often 1/2-20 or M12 × 1.5 | ❌ Different |
| Offset | Ford wheels higher positive offset | Dodge wheels lower offset | ❌ Different |
So even though both are “6 lug,” the measurements are not the same.
Can You Swap Ford 6 Lug Wheels onto Dodge?
The short answer: not directly.
If you try to bolt a Ford 6 × 135 wheel onto a Dodge with a 6 × 5.5 in pattern, the holes will not align. Even if you manage to mount it using force, it will cause severe vibration, damage studs, and risk wheel failure.
The only way to make them work is by using wheel adapters designed to convert 6 × 135 mm to 6 × 5.5 in (or vice versa). However, adapters come with limitations, which we’ll discuss below.
Read More: 2004 Dodge Ram C Code List – Quick Diagnostics In 2025!
Common Problems with Mismatched Wheels
Trying to fit wheels that don’t match exactly can cause:
- Improper seating on the hub → Leads to vibrations.
- Stripped studs or lug nuts → Caused by incorrect thread pitch.
- Brake clearance issues → Wrong offset may cause rubbing.
- Load problems: The wheel is not designed for the truck’s weight.
Safety is the number one concern here. Even if it looks like the wheel fits, mismatched specs can make driving dangerous.
Using Adapters and Spacers: A Solution?
Some owners use adapters to change the bolt pattern. For example, a 6 × 135 mm to 6 × 5.5 in adapter will allow you to mount a Dodge wheel on a Ford, or vice versa.
Pros:
- Allows use of otherwise incompatible wheels.
- It can widen the stance of the truck.
Cons:
- Adds stress to wheel bearings.
- Lowers the safety margin at highway speeds.
- Quality varies; cheap adapters may fail.
Adapters should only be used if they are high-quality, properly installed, and torqued to spec. Even then, many professionals recommend buying wheels that match your truck’s bolt pattern instead.
Expert Tips Before Buying or Swapping Wheels
- Always check your exact bolt pattern – You can measure it yourself or use online charts.
- Match hub bore and stud size – Even if the bolt pattern matches, these must align too.
- Consult manufacturer fitment charts – Ford and Dodge both publish official specs.
- Avoid guesswork – Just because a wheel looks similar doesn’t mean it will fit.
- When in doubt, use OEM wheels – Nothing beats factory fit and safety.
Is Ford And Dodge 6 Lug The Same Size
Ford and Dodge both use 6 lugs on some trucks, but the bolt patterns differ. Ford usually has 6×135mm, while Dodge often uses 6×139.7mm. Even though both have 6 bolts, the sizes are not the same.
Is Ford And Dodge 6 Lug The Same Ram 1500
The Dodge Ram 1500 often uses a 6×139.7mm bolt pattern, while most Ford F-150 trucks use 6×135mm. Because of this small difference, Ram 1500 wheels won’t directly fit on a Ford without adapters or modifications.
Is Ford And Dodge 6 Lug The Same 2022
In 2022, Ford F-150 still used the 6×135mm pattern, while Ram 1500 stayed with 6×139.7mm. The numbers are close, but they don’t match. So, their 6 lug wheels are not the same for the 2022 models.
Is Ford And Dodge 6 Lug The Same 2021
For 2021 models, Ford’s F-150 uses 6×135mm, and Dodge Ram 1500 sticks to 6×139.7mm. They may look similar since both have six bolts, but the spacing is slightly different, making them not the same fit.
Read Out: Dodge Ram 1500 Spark Plug Gap And Torque – Need to Know!
Will 6 Lug Dodge Rims Fit Ford F150
6 lug Dodge rims usually won’t fit a Ford F-150. The Dodge pattern is 6×139.7mm, and the Ford pattern is 6×135mm. Even though both have six bolts, the spacing difference makes them incompatible without adapters.
Will 6 Lug Ford Rims Fit Chevy Silverado 1500
Ford 6 lug rims typically do not fit a Chevy Silverado 1500. Silverado uses the 6×139.7mm pattern, while Ford commonly has 6×135mm. The difference is small but important so that they won’t interchange without special adapters.
Ford 6 Lug Pattern Same As Chevy
No, Ford’s 6 lug pattern is not the same as Chevy’s. Ford mostly uses 6×135mm, while Chevy trucks like the Silverado use 6×139.7mm. That small measurement change stops them from being a direct swap.
Will Dodge 5 Lug Wheels Fit Ford
Dodge 5 lug wheels generally won’t fit Ford vehicles. Even when both use five bolts, the bolt circle size, spacing, and hub bore are usually different. Always match the exact pattern to ensure a safe and proper fit.
FAQs
Are Ford Spacers and Ram Bolt Patterns the Same?
No, Ford spacers and Ram bolt patterns are different. Ford uses 6×135mm, while Ram often uses 6×139.7mm.
Will GM Lug Pattern Wheels Fit My Dodge?
GM wheels usually have 6×139.7mm, which matches some Dodge trucks. Always check the exact year and hub specs before swapping.
Ford, Dodge And Chev. Bolt Pattern The Same? (Wheels)
Not always. Chevy and Dodge often share 6×139.7mm, but Ford mostly uses 6×135mm, making patterns slightly different.
What Year Dodge Rims Fit My Ford?
Few Dodge rims fit Ford directly. Older Dodge 6×139.7mm rims may fit Fords using that pattern; otherwise, adapters are needed.
Is The Dodge Bolt Pattern The Same As The Ford?
No, Dodge mostly uses 6×139.7mm, while Ford prefers 6×135mm. Though both have six lugs, spacing prevents direct interchange.
What 6-Lug Pattern Does Ford Use?
Ford trucks like the F-150 commonly use a 6×135mm bolt pattern. This differs from Chevy and Dodge’s 6×139.7mm pattern.
Will Ford Rims Fit A Dodge Ram?
Ford rims usually won’t fit a Dodge Ram. The bolt patterns are close but not identical, requiring adapters.
What Is The Dodge 6-Lug Pattern?
Dodge commonly uses the 6×139.7mm bolt pattern on models like Dakota and Durango. Ram 1500 also shares this pattern.
What Other Vehicles Will Interchange With The 6 Lug Wheels?
Many Chevy, GMC, Toyota, Nissan, and Dodge trucks share 6×139.7mm wheels. Ford’s 6×135mm pattern does not interchange.
Will The Rims Of A Ram 18-Inch 6-Lugs Fit On A Chevy Tahoe 6 Lugs?
Yes, most Ram 1500 rims with a 6×139.7mm bolt pattern fit the Chevy Tahoe since they share the same 6×139.7mm bolt pattern.
Conclusion
Ford and Dodge may both use 6-lug wheels, but that doesn’t mean they are the same. Ford trucks like the F-150 commonly use the 6×135mm pattern, while Dodge and Ram trucks often stick with the 6×139.7mm (6×5.5 in) setup. That small difference makes their wheels incompatible without adapters. Even though both have six bolts, the spacing, hub bore, and stud size usually don’t match up.
If you’re planning a wheel swap, always confirm the exact bolt pattern, hub size, and offset before buying. While adapters can make certain setups work, factory-matched wheels are always the safest and most reliable option. In short, Ford and Dodge 6-lug wheels are not the same, and careful research is key before making any changes.